Skip to Content
How to Use ProWash
ProWash is designed to be very easy to operate. Simply place the platform in the wash chamber or in the basket, then start the cycle.
Consult the guide below for more detailed instructions.
1
Before each print, ensure that the hydrometers are submerged. This indicates that the IPA is not too saturated with resin and can still conduct an effective cleaning cycle.
2
Wash with Print Platform
We recommend washing with your platform when washing solid models printed with a flat base with the basket removed, place the platform in the wash chamber and press Start
3
Wash with Basket
We recommend washing with the basket in place when washing individual parts such as hollowed models and models taller than 4 inches (10 cm) in height. We also recommend removing supports before placing models into the basket
4
Avoid stacking models on top of each other when washing with the basket.
5
With the build platform or basket in place, select Start
6
When using fresh IPA, your Pro Wash/Dry may be unable to detect the liquid as it is so pure. Ensure that your IPA levels are at the minimum threshold and select Start Anyway
The Pro Wash/Dry will chime once it has completed both the washing and drying processes.