Overview

The build platform is an assembly comprised of:

• A large, flat platform
• A handle
• A connection cavity

Cured material adheres to the flat area of the build platform during the printing process. 
 

Installation Steps

1. To open the hood, pull the hood lock on the rear side and then lift the hood upwards.  
   

   

2. Turn the build platform knob on the top of the printer a couple of times to loosen it.
   
   

   

3. Slide the build platform into the build platform housing at the top of the Z-axis tower.
    
4. Turn the build platform knob to tighten and secure the build platform in place.
   It is important to securely tighten the build platform before printing. Failure to do so will cause the build platform to be uneven and can cause build failures.