Make sure the build platform is clean and the material tray is in place and has material in it before starting a print. Failure to do so will result in failed builds and damage to the equipment.

1. From the Home screen, select Job List:
   

   

2. Select the job folder from the Job List.
   

   

3. Select the Play button to start the job. The system checks if the printer is ready to start a print.
   

   

   

4. To start the job now, wait until the job starts. 
   To delay your job print, press Start Later.
   

   

    
   The minimum delay time is 15 minutes. The maximum delay time is 999 hours 45 minutes.
5. Set the required delay time using the + and - icons in the Hours and Minutes fields and select Apply.
   

   

6. Wait until the job starts.