NextDent Ortho Clear


NextDent Ortho Clear is a Biocompatible Resin designed for all kinds of retainers, splints, and mouthguards. 

This resin has been engineered to have the rigidity & accuracy necessary for clinical use. 

Parts made with Ortho Clear and all other Biocompatible resins need to be washed with IPA and fully post cured - typically around 25-30 minutes in a 48W 400-420nm UV light system without temperature controls. For more precise results use a professional UV curing system for 10-15 minutes at 60C. There will be a distinct change in color and texture when your guide is fully cured.

When you first start using the NextDent Ortho Clear resin you should calibrate your printer for this resin, as fast-printing and high-viscosity resins like Surgical Guide & Ortho Clear have a smaller window of proper calibration than most of our other resins. Do a test print and check fit with your guide sleeves of choice, as in some cases we've seen users have to tweak a few settings if they are used to designing for mills. Orthodontic Splints & other similar devices get best results printed intaglio side up with support structures, at the 100 micron layer height (rougher layers means more friction which often leads to a better fit vs 50 micron devices).

For more info, visit NextDent's site at

Safety Data Sheet

We can help with that!

If you're experiencing difficulties or have questions about any of your SprintRay products, submit a support ticket or contact us at 800-914-8004

Was this article helpful?
0 out of 0 found this helpful