Connecting to your MoonRay

When you first boot up MoonRay it will begin broadcasting its own wifi network with the name Moonray - [Serial Number]. You can connect to this network with the password 'sprintray' (case sensitive). Press the icon of the printer on the right side of the screen to reveal the "Connect A Printer" button which will walk you through the rest of the process. If you've connected your printer over ethernet into your network it should automatically connect when you open rayware.



After you connect to MoonRay's Ad Hoc Network and 


If this process does not work - check our Advanced Network Troubleshooting page for some possible solutions, and don't hesitate to reach out to us at: 800-914-8004.

Was this article helpful?
1 out of 4 found this helpful