Screen Cleaning Mode

The ProCure 2 offers a Screen Cleaning Mode that locks the touchscreen to allow for easy cleaning of the top touchscreen and surfaces of the unit. The touchscreen should be cleaned with small amounts of Isopropyl Alcohol if resin spills or stick fingerprints are present. A final cleaning with a small amount of Windex or similar glass cleaner can be performed. 

CAUTION: Do not spray alcohol or Windex directly onto touchscreen, as damage from excess liquid can occur. Always spray the paper towels or microfiber cloth being used with the small amounts of the cleaning agent before use to prevent liquid damage to the touchscreen.

 

The Screen Cleaning Mode is accessible from the Settings tab at the top

 

mceclip0.png

mceclip1.png

 

Once enabled, you will need to hold the Unlock button on the touchscreen for 5 seconds to return to normal function

 

mceclip2.png

Was this article helpful?
0 out of 0 found this helpful