SprintRay IDB 2



Instructions For Use


The SprintRay IDB 2 resin is a light-curable polymerizable resin intended to be used with extraoral curing light equipment. The IDB 2 resin is indicated for the fabrication, by additive manufacturing, of Indirect Bonding Tray (IBT). SprintRay IDB 2 resin is offered in clear color. The material is an alternative to traditional IBT material. SprintRay IDB 2 Resin is intended exclusively for professional dental work. Fabrication of IBT with SprintRay IDB 2 Resin requires a 3D design of the custom device designed by a qualified provider. It also requires a 3D Printer and Cure System to produce the devices.


The IDB 2 resin is contraindicated in case of the following:

  • If a patient is known to be allergic to any of the ingredients.
  • Direct intraoral contact of uncured or partially uncured material.
  • For every application that is not part of the indication (see above).


Key Benefits

  • Cost-effective, rapid bracket placement
  • High tear resistance
  • Improved formula boosting accuracy vs IDB resin

Quick Tips

  • ProCure 2 Curing Profile:
    • Zone A: 1:50 mins
    • Center / "Bolt Mode" : 1:22 mins
    • Zone A + B: 2:29 mins

At a Glance Highlights



Handling and Processing

IDB 2 resin is non-toxic in both liquid and solid form, and it is classified as Biocompatible material. It is also classified as a sensitizer, which means that exposure over time can cause your body to have a mild allergic reaction. May cause skin irritation. May cause an allergic skin reaction. May cause severe eye irritation. May cause respiratory irritation. Here is how to handle resin safely:

  1. Always wear gloves
    1. Always wear gloves when handling uncured resin. Whether you are pouring, removing
      printed parts from the platform, or even after they have been washed, must wear gloves
      to limit exposure to resin.
  2. Mix thoroughly
    1. 3D printing resins contain chemicals of different weights; therefore, it is essential to mix
      resin before every print thoroughly. For resin already in the tank, use provided resin wiper
      to stir the material gently. If pouring from a bottle, shake the bottle vigorously for several
      minutes before dispensing
  3. Check expiration dates
    1. Resin has a shelf life; it is essential to keep an eye on the expiration date. The use of
      expired resin will likely result in failed prints, as the compounds required for curing break
      down and will not activate properly. The expiration date for resins is printed on the back
      of the bottle.
  4. Dispose of properly
    1. Liquid resin should be cured before being disposed of. Pour liquid resin into a clear
      container and set it in direct sunlight. Once cured, it can be treated as waste and
      disposed of in regular trash.



Fabrication of Indirect Bonding Tray

Preparation Before Printing

Being prepared is key for success! As you plan to implement this new workflow, check
all the supplies and inventory you may need or desire for a seamless workflow.

  1. Pro Printer
  2. Pro Wash/Dry
  3. Pro Cure or Pro Cure 2
  4. RayWare software
  5. SprintRay IDB 2 resin
  6. Gloves
  7. (IPA) Isopropyl Alcohol 91% or higher
  8. Scott Shop towels
  9. Protective eyewear

Design of the IBT

Once the intraoral scans of the patient are submitted to a dental-design service/lab, the IBT is designed and provided in STL file format by the dental-design service/lab



Bring the designed STL files to RayWare. Position the Intaglio surface of the IBT away from the print platform, with the occlusal surface/base of the design lying flat on the print platform.

Select “SprintRay IDB 2” resin setting for print-setting and use 100-micron thickness.


Ensure Resin Tank is fully secured and filled to the recommended Resin-Level.
Ensure the Print Platform is clean, dry, securely placed, and locked on the platform arm


Washing and Drying

After your IBT has been printed successfully, it must be washed using Isopropyl Alcohol (IPA) with a concentration of 91% or higher before being post-cured. SprintRay highly recommends Pro Wash/Dry for your cleaning process; however, if you don’t have access to a Pro Wash/Dry yet, you may allocate a separate Ultrasonic bath dedicated to post-print washing with IPA, or alternatively, a dish for soaking along with a Soft/Medium bristle brush to manually clean your prints in IPA. Ensure NOT to immerse the Try-in Denture for more than 10 min in the IPA bath.

Remember: IPA is highly flammable! Please keep it away from heat sources, sparks, and

Ensure that your IBT is completely dry before the next step; if not, use
compressed air to dry your IBT rapidly.

Remove the IBT from the Print Platform.

Post curing

Next, the printed IBT needs to be properly post-cured using a Pro Cure to maximize strength and accuracy and comply with FDA standards.

All the post-curing settings are preset in Pro Cure 1 and Pro Cure 2 units.



We can help with that!

If you're experiencing difficulties or have questions about any of your SprintRay products, submit a support ticket or contact us at 800-914-8004

Was this article helpful?
0 out of 0 found this helpful