Connecting Pro Cure 2 to WiFi



The SprintRay Pro Cure 2 is equipped with a WiFi chipset that makes connecting to your network for resin profile updates, as well as necessary software/firmware updates.


The ProCure 2 only connects to 2.4GHz WiFi networks. If you do not see your network available on the list, it's possible that your network is configured to the 5GHz channel. Speak with your IT personnel about adding a 2.4GHz channel to your WiFi network.


To begin, select the internet access icon on your ProCure2 touch screen




Activate the Wi-Fi connection and select the desired network:



Input your network password and select the green check icon:




Once the correct password is input, the Pro Cure 2 will now be connected to your WiFi network.



Was this article helpful?
1 out of 6 found this helpful