Skip to Content
Operating the Different Curing Zones

Operating the Different Curing Zones

The ProCure 2 offers the option of curing the entire chamber, or you can select a smaller isolated curing zone to dramatically speed up cure times if only curing a small number of models, as well as Bolt Mode, for curing 1-3 models in the fastest time possible


To begin your curing cycle of choice, select either Appliances or Materials, and select an appliance and/or resin profile


Your ProCure 2's default operation is side A, which will reflect the shorter curing times, as only one side of the chamber will be operational. To operate side A only, select Start


To operate both side A and B, select the A and B followed by Start


To use Bolt Mode, which cures 1-3 models in the center of the Curing Zones in the fastest possible time, select the Center curing profile


Double check model placement before starting the cure cycle!

Need more help?

Ask a different question
Select a different product
Copyright © 2024 SprintRay Inc.Sitemap
AboutAbout UsEventsBlogPartners & DistributorsBecome a PartnerCareersRequest Product Support
Privacy PolicyTerms of Use