Skip to Content
ProCure Manual Firmware Update

ProCure Manual Firmware Update

Please follow the step-by-step guide below to manually updated your ProCure firmware:


Turn off Pro Cure and unplug it from power

  • Toggle the rear power switch to the off position

  • Unplug the power cable from the power plug port

  • Note: the Pro Cure must be disconnected from power to successfully update


Connect Pro Cure to your computer with a USB-A to USB-B cable

● This must be done only after the machine is disconnected from the power


Download these two files to your computer

(Right click to save the files below)

version.txt (4 Bytes)

procure.bin(400 KB)


Format the Drive using Disk Utility

You will format the drive via Disk Utility. When opening Disk Utility on your Mac, you should see the ProCure show up as a USB drive on the left side.​ Select the drive and click "Erase". You should see a window pop up, please ensure the Format Selected is ExFAT as this is the format compatible with both Mac and Windows​. Once selected, click erase. This will erase and format the drive.

Once you are done with the format, open a new finder window. Drag and drop both procure.bin and version.txt files onto the ProCure's USB drive.​​​​ ​​

Once you've copied both files onto the drive, you will eject the drive. Unplug the USB cable from the ProCure


Power on the Pro-Cure

Plug in the power cord
Turn the Pro-Cure power switch to the on position

Need more help?

Ask a different question
Select a different product
Copyright © 2024 SprintRay Inc.Sitemap
AboutAbout UsEventsBlogPartners & DistributorsBecome a PartnerCareersRequest Product Support
Privacy PolicyTerms of Use