Skip to Content
ProCure Manual Firmware Update

ProCure Manual Firmware Update

Please follow the step-by-step guide below to manually updated your ProCure firmware:


Turn off Pro Cure and unplug it from power

  • Toggle the rear power switch to the off position

  • Unplug the power cable from the power plug port

  • Note: the Pro Cure must be disconnected from power to successfully update


Connect Pro Cure to your computer with a USB-A to USB-B cable

This must be done only after the machine is disconnected from the power


Locate the Pro-Cure in Windows File Explore

To open File Explorer, click on the File Explorer icon located in the taskbar. Alternatively, you can open File Explorer by clicking on the Start button and then clicking on File Explorer or use the keyboard shortcut (WIndows Key + E)

The Pro-Cure will appear as a USB DISK (D:) on your computer

If the Pro-Cure does not appear right away, unplug the USB from your computer, then plug back in


Format the Pro-Cure USB drive

  • Right click on the USB drive location

  • Select Format


Download these two files to your computer

version.txt (4 Bytes)

procure.bin (400 KB)


Manually add the following two files to the Pro-Cure USB to replace the previously deleted files

Note the files must appear exactly as is, be sure the files are not URL links but rather files containing actual data

This can be done manually by selecting the files then sending them to the correct location

Files can also be dragged and dropped from quick download bar


Properly eject the Pro-Cure USB drive

  • Utilize the eject function on your computer before physically removing the cable

  • Right click on the USB drive and select eject

  • Remove the USB-A to USB-B cable completely from the Pro-Cure

  • If the cable remains attached to the Pro-Cure the machine will sense a connection and the process may not complete correctly


Power on the Pro-Cure

Plug in the power cord

Turn the Pro-Cure power switch to the on position

Need more help?

Ask a different question
Select a different product
Copyright © 2024 SprintRay Inc.Sitemap
AboutAbout UsEventsBlogPartners & DistributorsBecome a PartnerCareersRequest Product Support
Privacy PolicyTerms of Use