Overview
The resin tank holds liquid resin during the printing process. NanoPrint uses compact slide-in tanks. When not printing, always cover the tank with the included rubber lid.
Resin Handling
Always wear gloves when handling uncured resin.
Resin Tank Handling
| Do's | Don'ts |
| ✔ Use one tank per resin type ✔ Keep away from light ✔ Hold by the handle ✔ Cover when not in use ✔ Wear gloves while handling ✔ Store on the tank tray when outside the printer |
✘ Change resin type without a new tank ✘ Touch the film or underside ✘ Use sharp objects near the tank ✘ Puncture the film ✘ Overfill beyond the MAX line |
Resin Tank Storage
Use Tank Lid
Remove the lid before printing. Reinstall it when you are finished printing for the day. This helps preserve the life of your resin.
Use Tank Tray
Always place the tank on a tray when it is not installed in the printer. This protects the sensitive film on the underside of the tank.
Using the Resin Tank
Before each print job, use the included resin wiper to stir the resin and check the bottom of the tank for cured resin or debris.
Using the same resin wiper, mix until the resin is uniform in color.
Top off the resin tank whenever necessary. The NanoPrint Tank holds 150mL of resin. DO NOT overfill.
Your NanoPrint monitors the health of your resin tank. The touchscreen will notify you when it is time to replace the tank.