Overview

Duct Mode is an optional setting built into the NanoWash. When enabled, the system increases fan power during the drying phase, allowing for a faster, more efficient drying cycle. Proper routing of IPA fumes is required in order to enable duct mode.
 

Setting up the Exhaust (Required)

Proper routing of IPA fumes is important in order to safely use duct mode. 

Located on the back corner of the NanoWash, next to the power port, is a small exhaust port. 

Attach the included rubber adapter to the exhaust port. Connect the other end to a flexible exhaust hose (not included) approximately 1.6 in (4 cm) in diameter. Route the exhaust hose to vent IPA fumes directly outdoors through a window or into a dedicated ventilation hood.

Once the proper ventilation is set up, Duct Mode can be enabled under the settings tab on the NanoWash.
 

What if I Don't Have a Way to Route IPA Fumes?

Duct Mode is an optional feature on the NanoWash. If proper exhaust ventilation is not achievable, the NanoWash can be operated in Open Mode. This mode reduces the fan speed during drying, greatly reducing the rate of IPA fumes. Always operate the NanoWash in a well-ventilated room regardless of the drying mode selection.