Overview

ProCure 2 supports a guided denture luting workflow that walks you through curing denture teeth and the denture base, then luting and curing them together as a single appliance. The on-screen instructions automatically adjust based on the materials you select, helping ensure proper bonding and final mechanical performance.

Select Appliance

• From the ProCure 2 Home Screen, select the Appliances list.
• Choose Conventional Denture from the available options.

Select Materials

• Select the Denture Teeth material you are using.
• Select the Denture Base material you are using.
• ProCure 2 will automatically determine the correct curing sequence based on the selected material combination.

Luting Instructions

• Follow the step-by-step instructions displayed on the touchscreen.
• The denture curing process is typically a two-step workflow:
  • Step 1: Cure the selected denture resin components individually using the recommended cure time.
  • Step 2: Lute the denture teeth and base together, then cure them as a single denture.
• Note: If the same resin brand is used for both the denture teeth and base, ProCure 2 may only require a single curing cycle during the luting process.

Once all on-screen steps are complete, your denture will be fully luted and cured, ready for finishing and polishing.