Preparing Crowns For Print in RayWare Cloud

RayWare Cloud takes the effort out of preparing your files for print, by automatically nesting them in the most optimal position for printing.

 

Pro55-3Quarter-crowns.png

 

To begin, select Crown, select Yes for Supports, and choose your Printer and Material type.

 

crown_start.png

 

Once you have verified your selections, you can drag and drop your STL files or click Browse to locate them in your file viewer. Select Next.

 

crown_upload.png

 

RayWare cloud will then analyze your file and place it in its optimal position with the ideal Balanced supports.

 

crown_setup.png

 

For the best results with fit and accuracy, we recommend taking extra care to view the placement of the supports by holding down the left button on the mouse and rotating the build platform to view the model from the underside.

 

underside.gif

 

To modify the support structures, select the model and click on the Supports dropdown menu on the right, then click Add/Remove Individual Supports.

 

edit_supports.png

 

The blue dots on the model surface indicate where supports will be placed. Click on the model surface to add a support, or click on a blue dot to remove. Once finished, click Confirm Changes.

 

crown_support_edit.gif

 

Once finished, click Confirm Changes, and verify the correct Print Job Settings are selected.

 

crown_print_job_settings.png

 

Once ready, click Send to Printer. Select your compatible printer, and click the Send to Queue button.

Was this article helpful?
0 out of 0 found this helpful