Files Needed for Design Submission

Different files are needed depending on the type of Treatment you have selected for the patient, as well as the type of intraoral scanner you are using.

Here is a breakdown of the Treatments we offer, and the necessary files required for each:

Occlusal Guards

og.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file
  • Bite/Occlusion scan(s) - not required if using Primescan, iTero, or Omnicam IOS

Smile Design

smile.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file
  • Bite/Occlusion scan(s) - not required if using Primescan, iTero, or Omnicam IOS
  • Photos of the patient smiling

Bracket Removal

bracket.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file

Implant Planning and Surgical Guide

sg.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file
  • CBCT scan in DICOM format, uploaded as a ZIP archive

Models for Clear Aligners

aligners.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file
  • Bite/Occlusion scan(s) - not required if using Primescan, iTero, or Omnicam IOS
  • Patient X-Rays
    • Cephalometric X-ray
    • Panoramic X-ray
  • Patient Photos
    • Front Face
    • Front Smile
    • Right Side Face
    • Left Side Face
    • Upper Jaw
    • Lower Jaw
    • Front Teeth
    • Right Side Teeth
    • Left Side Teeth

Surgical Guide with Temporary Restoration

sg_with_temp.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file
  • CBCT scan in DICOM format, archived into a ZIP file

Crown

crown.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file

Custom Bleaching Trays

bleach.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file

Removable Dentures

dentures.png

Patient Files Needed

  • Scan of existing denture exported as an STL file
  • Scan of opposing arch as a separate STL file

AI Nightguard

ai_ng.png

Patient Files Needed

  • Upper Arch scan as a separate STL file
  • Lower Arch scan as a separate STL file

Hybrid Dentures

hybrid.png

Patient Files Needed

  • Scan with the current appliance in the patient's mouth, capturing as much anatomy as possible around the current appliance, i.e. retromolar pad, tuberosities, buccal area
    • Upper Arch scan as a separate STL file
    • Lower Arch scan as a separate STL file
  • Bite/Occlusion scan(s) for optimal results - not required if using Primescan, iTero, or Omnicam IOS
  • Tissue scans with healing caps seated over multi-unit abutments
    • Upper Arch scan as a separate STL file
    • Lower Arch scan as a separate STL file
  • Photogrammetry Data uploaded as a ZIP archive, including implant position files and STLs
  • Patient Photos
    • Rest position
    • High Smile Line
    • Retracted

 

 

We can help with that!

If you're experiencing difficulties or have questions about any of your SprintRay products, submit a support ticket or contact us at 800-914-8004

Was this article helpful?
0 out of 0 found this helpful